Igt Slot Machine Error 65

IGT S+ Slot Machine Error Codes And Troubleshooting
Igt Slot Machine Repair
See All Results For This Question

The starter for the top florescent bulb on an IGT S Plus machine is located directly behind the florescent bulb fixture on the left side of the slot machine in the top box area. It is replaced by twisting about a quarter to half a turn as it is held in place with a bayonet type mount. You will note that most of the machines will say Max Hopper Pay 400 or 1000 on the reel glass, this is the same thing but smaller. Note it is not possible to make any of these settings changes until you have 0 credits on the machine. Is it possible to clear a 3300 code on an IGT w/o filling the hopper? Post a Reply to This Message.

Support VoyForums

VoyForums Announcement: Programming and providing support for this service has been a labor of love since 1997. We are one of the few services online who values our users' privacy, and have never sold your information. We have even fought hard to defend your privacy in legal cases; however, we've done it with almost no financial support -- paying out of pocket to continue providing the service. Due to the issues imposed on us by advertisers, we also stopped hosting most ads on the forums many years ago. We hope you appreciate our efforts.

Show your support by donating any amount. (Note: We are still technically a for-profit company, so your contribution is not tax-deductible.) PayPal Acct: Feedback:

Donate to VoyForums (PayPal):

[ Login ] [ Contact Forum Admin ] [ Main index ] [ Post a new message ] [ Search |Check update time | Archives:1, 2, 3, [4], 5, 6, 7, 8, 9, 10 ]

Subject: Clearing IGT 3300 code without filling the hopper
Author: John Schmidt	[ Next Thread \|Previous Thread \|Next Message \|Previous Message] Date Posted:08:07:27 11/05/06 Sun Is it possible to clear a 3300 code on an IGT w/o filling the hopper? [Next Thread \|Previous Thread \|Next Message \|Previous Message]

IGT S+ Slot Machine Error Codes And Troubleshooting

Replies:

Igt Slot Machine Repair

[> Subject: Re: Clearing IGT 3300 code without filling the hopper

Author:
jay
[ Edit | View ]

Date Posted:06:28:44 11/06/06 Mon
I am doubtful that this is possible.
If you have a 3300 then the S+ is trying to complete a payout sequence. You would - refill, let it continue its payout and refill again until it is complete.
There are a couple of techniques for avoiding this situation.
1. Remove the wire feeding your cash/credit button. If you can't cashout you can't get a 3300 error. Make sure you have your game set to have all pays go to credits 5-1 on most chips. Set your max credits to 9998 (there is a problem with 9999).
2. If you don't like the idea above, Set your max hopper pay to 1. This will cause the machine to spit out one coin then the machine will lock up into 'hand pay'. You simply turn the reset key and the machine will count down the pay on the LED windows, reset it self and continue. You will note that most of the machines will say Max Hopper Pay 400 or 1000 on the reel glass, this is the same thing but smaller.
Note it is not possible to make any of these settings changes until you have 0 credits on the machine.
>Is it possible to clear a 3300 code on an IGT w/o
>filling the hopper?
[ Post a Reply to This Message ]

[ Contact Forum Admin ]

Forum timezone: GMT-8
VF Version: 3.00b, ConfDB:
Before posting please read our privacy policy.
VoyForums^(tm) is a Free Service from Voyager Info-Systems.
Copyright © 1998-2019 Voyager Info-Systems. All Rights Reserved.

IGT S+ Slot Machine error codes and troubleshooting

See All Results For This Question

Tilt Code	Malfunction	Clearing the Tilt
12	Low battery	Replace battery.Open and close door.
21	Coin-in	Open and close door.
23	Excessive extra coins in	Open and close door.
3100	Extra coin out	Open and close door.
3200	Coin jam in hopper	Open and close door.
3300	Hopper empty	Open and close door.
34_0	Hopper optics blocked	Open and close door.
35_0	Coin out reverse direction detected	Open and close door.
36_0	Coin optic exit time too short	Open and close door.
36_1	Coin optic exit time too long	Open and close door.
41	Reel 1 tilt	Open and close door.
42	Reel 2 tilt	Open and close door.
43	Reel 3 tilt	Open and close door.
44	Reel 4 tilt	Open and close door.
45	Reel 5 tilt	Open and close door.
49	Reel mechanism disconnected	Reconnect reel mechanism.Open and close door.
61	Bad CMOS RAM	Open door and press self test button for 2 to 3 seconds.See 61_1.
61_1	Game data reset	Close door and turn jackpot reset key.
61_2	Recoverable CMOS error	Open door and press self test button for 2 to 3 seconds.See 61_1.
61_3	Hardware malfunction	Open door and press self test button for 2 to 3 seconds.See 61_1.
62_0	Bad game PROM	Replace game PROM.
62_1	Bad data PROM	Replace data PROM.
65_0	Bad EEPROM device	Replace EEPROM with a blank one.
65_1	Bad EEPROM data	Open door and press self test button for 1 to 2 seconds.
65_2	Game type mismatch	Open door and press self test button for 1 to 2 seconds.
65_3	Game options & meters not in most current format	Recover options & meters by using correct set chip. OR Turn jackpot reset key to continue power-up procedure.Game will be upgraded to most current format.See 65_1 or 65_2.
66	Game PROM changed	Open door.Turn machine off, then on.
67	Data PROM changed	Open door.Turn machine off, then on.
68	Non-compatible data PROM	Install correct data PROM.
99_1	Stacker jam	Open and close door.
99_2	Cash box removed	Open and close door.
99_4	Cash box full	Open and close door.
99_5	Hardware error	Open and close door.
99_6	Reverse bill detected	Open and close door.